Chrysler Voyager Radio Code

Every Chrysler Voyager from 2001 to 2015: which radio was fitted, where its serial number hides, and what we can do with it.

Your code comes from the serial number of the radio, not from the car — so the first job is getting that number off the unit. The table below is your Voyager: the units fitted, and where the serial hides on each.

Already have the serial? Type it in and we will tell you straight away whether we can answer it.

All Chrysler radio codes →

Free*
That does not look like a Chrysler serial — check the table below for where to find it.
We never ask for the code you are missing — only the serial.

Which radio is in your Voyager?

GenerationRadios fittedSerial Where to read itWhat we do
RG/RT
2001–2015		 RAQ, RAK, REF T00BE… / T0MYD… label on the top of the unit — the radio has to come out of the dash Instant, free

Radio names are what is written on the fascia, not the name of the company that built the unit — a “6000 CD” or an “RCD 300” is what you see in the car. Unit fitment varies by market and trim, so treat the list as the usual case and let the serial decide: it is the serial that determines the code, not the model.

How to enter the code in your Voyager

  1. Turn the radio on — “CODE” should appear on the display.
  2. Use preset buttons 1–4: press each one repeatedly until its digit is correct. Past 9 it cycles back to 0.
  3. Confirming varies by model, but on ~90% of units you hold “ENTER” or “OK” for 2–5 seconds to accept the code.

Careful: most units lock for good after about ten wrong attempts. If a code does not take, stop and email us before trying again.

Other Chrysler models

300C